Crypto Key Generate Rsa 2048

Crypto Key Generate Rsa 2048 7,5/10 1961 votes

RSA is the most widespread and used public key algorithm. Its security isbased on the difficulty of factoring large integers. The algorithm haswithstood attacks for more than 30 years, and it is therefore consideredreasonably secure for new designs.

  1. Crypto Key Generate Rsa 2048 Code
  2. Crypto Key Generate Rsa General-keys Modulus 2048
  3. Cisco Switch Generate Rsa Key

The algorithm can be used for both confidentiality (encryption) andauthentication (digital signature). It is worth noting that signing anddecryption are significantly slower than verification and encryption.

The cryptographic strength is primarily linked to the length of the RSA modulus n.In 2017, a sufficient length is deemed to be 2048 bits. For more information,see the most recent ECRYPT report.

Both RSA ciphertexts and RSA signatures are as large as the RSA modulus n (256bytes if n is 2048 bit long).

The module Crypto.PublicKey.RSA provides facilities for generating new RSA keys,reconstructing them from known components, exporting them, and importing them.

An RSA key pair of 2048 bits only provides a key strength of 112 bits (i.e. 112 bits of security), while AES-128 provides about 127 bits of security. In general you should try to use a 3072 bit key instead. To enable SSH, you generate a DSA or RSA host key on the device. The SSH server on the ICX device uses this host DSA or RSA key, along with a dynamically generated server DSA or RSA key pair, to negotiate a session key and encryption method with the client trying to connect to it. Crypto.PublicKey.RSA.generate (bits, randfunc=None, e=65537) ¶ Create a new RSA key pair. The algorithm closely follows NIST FIPS 186-4 in its sections B.3.1 and B.3.3. The modulus is the product of two non-strong probable primes.

Crypto key generate rsa command

As an example, this is how you generate a new RSA key pair, save it in a filecalled mykey.pem, and then read it back:

Crypto.PublicKey.RSA.generate(bits, randfunc=None, e=65537)

Create a new RSA key pair.

The algorithm closely follows NIST FIPS 186-4 in itssections B.3.1 and B.3.3. The modulus is the product oftwo non-strong probable primes.Each prime passes a suitable number of Miller-Rabin testswith random bases and a single Lucas test.

Parameters:
  • bits (integer) – Key length, or size (in bits) of the RSA modulus.It must be at least 1024, but 2048 is recommended.The FIPS standard only defines 1024, 2048 and 3072.
  • randfunc (callable) – Function that returns random bytes.The default is Crypto.Random.get_random_bytes().
  • e (integer) – Public RSA exponent. It must be an odd positive integer.It is typically a small number with very few ones in itsbinary representation.The FIPS standard requires the public exponent to beat least 65537 (the default).

Returns: an RSA key object (RsaKey, with private key). Rsa public key generation openssl.

Crypto.PublicKey.RSA.construct(rsa_components, consistency_check=True)

Construct an RSA key from a tuple of valid RSA components.

The modulus n must be the product of two primes.The public exponent e must be odd and larger than 1.

In case of a private key, the following equations must apply:

[begin{split}begin{align}p*q &= n e*d &equiv 1 ( text{mod lcm} [(p-1)(q-1)]) p*u &equiv 1 ( text{mod } q)end{align}end{split}]
Parameters:
  • rsa_components (tuple) –

    A tuple of integers, with at least 2 and nomore than 6 items. The items come in the following order:

    1. RSA modulus n.
    2. Public exponent e.
    3. Private exponent d.Only required if the key is private.
    4. First factor of n (p).Optional, but the other factor q must also be present.
    5. Second factor of n (q). Optional.
    6. CRT coefficient q, that is (p^{-1} text{mod }q). Optional.
  • consistency_check (boolean) – If True, the library will verify that the provided componentsfulfil the main RSA properties.
Raises:

ValueError – when the key being imported fails the most basic RSA validity checks.

Returns: An RSA key object (RsaKey).

Crypto.PublicKey.RSA.import_key(extern_key, passphrase=None)

Import an RSA key (public or private).

Parameters:
  • extern_key (string or byte string) –

    The RSA key to import.

    The following formats are supported for an RSA public key:

    • X.509 certificate (binary or PEM format)
    • X.509 subjectPublicKeyInfo DER SEQUENCE (binary or PEMencoding)
    • PKCS#1RSAPublicKey DER SEQUENCE (binary or PEM encoding)
    • An OpenSSH line (e.g. the content of ~/.ssh/id_ecdsa, ASCII)

    The following formats are supported for an RSA private key:

    • PKCS#1 RSAPrivateKey DER SEQUENCE (binary or PEM encoding)
    • PKCS#8PrivateKeyInfo or EncryptedPrivateKeyInfoDER SEQUENCE (binary or PEM encoding)
    • OpenSSH (text format, introduced in OpenSSH 6.5)

    For details about the PEM encoding, see RFC1421/RFC1423.

  • passphrase (string or byte string) – For private keys only, the pass phrase that encrypts the key.

Returns: An RSA key object (RsaKey). Generate key number javascript map array.

Raises:ValueError/IndexError/TypeError – When the given key cannot be parsed (possibly because the passphrase is wrong).

Crypto Key Generate Rsa 2048 Code

class Crypto.PublicKey.RSA.RsaKey(**kwargs)

Class defining an actual RSA key.Do not instantiate directly.Use generate(), construct() or import_key() instead.

Variables:
  • n (integer) – RSA modulus
  • e (integer) – RSA public exponent
  • d (integer) – RSA private exponent
  • p (integer) – First factor of the RSA modulus
  • q (integer) – Second factor of the RSA modulus
  • u – Chinese remainder component ((p^{-1} text{mod } q))
exportKey(format='PEM', passphrase=None, pkcs=1, protection=None, randfunc=None)

Export this RSA key.

Parameters:
  • format (string) –

    The format to use for wrapping the key:

    • ’PEM’. (Default) Text encoding, done according to RFC1421/RFC1423.
    • ’DER’. Binary encoding.
    • ’OpenSSH’. Textual encoding, done according to OpenSSH specification.Only suitable for public keys (not private keys).
  • passphrase (string) – (For private keys only) The pass phrase used for protecting the output.
  • pkcs (integer) –

    (For private keys only) The ASN.1 structure to use forserializing the key. Note that even in case of PEMencoding, there is an inner ASN.1 DER structure.

    With pkcs=1 (default), the private key is encoded in asimple PKCS#1 structure (RSAPrivateKey).

    With pkcs=8, the private key is encoded in a PKCS#8 structure(PrivateKeyInfo).

    Note

    This parameter is ignored for a public key.For DER and PEM, an ASN.1 DER SubjectPublicKeyInfostructure is always used.

  • protection (string) –

    (For private keys only)The encryption scheme to use for protecting the private key.

    If None (default), the behavior depends on format:

    • For ‘DER’, the PBKDF2WithHMAC-SHA1AndDES-EDE3-CBCscheme is used. The following operations are performed:
      1. A 16 byte Triple DES key is derived from the passphraseusing Crypto.Protocol.KDF.PBKDF2() with 8 bytes salt,and 1 000 iterations of Crypto.Hash.HMAC.
      2. The private key is encrypted using CBC.
      3. The encrypted key is encoded according to PKCS#8.
    • For ‘PEM’, the obsolete PEM encryption scheme is used.It is based on MD5 for key derivation, and Triple DES for encryption.

    Specifying a value for protection is only meaningful for PKCS#8(that is, pkcs=8) and only if a pass phrase is present too.

    The supported schemes for PKCS#8 are listed in theCrypto.IO.PKCS8 module (see wrap_algo parameter).

  • randfunc (callable) – A function that provides random bytes. Only used for PEM encoding.The default is Crypto.Random.get_random_bytes().
Returns:

the encoded key

Return type:

byte string

Raises:

ValueError – when the format is unknown or when you try to encrypt a privatekey with DER format and PKCS#1.

Warning

If you don’t provide a pass phrase, the private key will beexported in the clear!

export_key(format='PEM', passphrase=None, pkcs=1, protection=None, randfunc=None)

Export this RSA key.

Parameters:
  • format (string) –

    The format to use for wrapping the key:

    • ’PEM’. (Default) Text encoding, done according to RFC1421/RFC1423.
    • ’DER’. Binary encoding.
    • ’OpenSSH’. Textual encoding, done according to OpenSSH specification.Only suitable for public keys (not private keys).
  • passphrase (string) – (For private keys only) The pass phrase used for protecting the output.
  • pkcs (integer) –

    (For private keys only) The ASN.1 structure to use forserializing the key. Note that even in case of PEMencoding, there is an inner ASN.1 DER structure.

    With pkcs=1 (default), the private key is encoded in asimple PKCS#1 structure (RSAPrivateKey).

    With pkcs=8, the private key is encoded in a PKCS#8 structure(PrivateKeyInfo).

    Note

    This parameter is ignored for a public key.For DER and PEM, an ASN.1 DER SubjectPublicKeyInfostructure is always used.

  • protection (string) –

    (For private keys only)The encryption scheme to use for protecting the private key.

    If None (default), the behavior depends on format:

    • For ‘DER’, the PBKDF2WithHMAC-SHA1AndDES-EDE3-CBCscheme is used. The following operations are performed:
      1. A 16 byte Triple DES key is derived from the passphraseusing Crypto.Protocol.KDF.PBKDF2() with 8 bytes salt,and 1 000 iterations of Crypto.Hash.HMAC.
      2. The private key is encrypted using CBC.
      3. The encrypted key is encoded according to PKCS#8.
    • For ‘PEM’, the obsolete PEM encryption scheme is used.It is based on MD5 for key derivation, and Triple DES for encryption.

    Specifying a value for protection is only meaningful for PKCS#8(that is, pkcs=8) and only if a pass phrase is present too.

    The supported schemes for PKCS#8 are listed in theCrypto.IO.PKCS8 module (see wrap_algo parameter).

  • randfunc (callable) – A function that provides random bytes. Only used for PEM encoding.The default is Crypto.Random.get_random_bytes().
Returns:

the encoded key

Return type:

byte string

Raises:

ValueError – when the format is unknown or when you try to encrypt a privatekey with DER format and PKCS#1.

Warning

If you don’t provide a pass phrase, the private key will beexported in the clear!

has_private()

Whether this is an RSA private key

Crypto Key Generate Rsa General-keys Modulus 2048

publickey()

A matching RSA public key.

Returns:a new RsaKey object
size_in_bits()

Size of the RSA modulus in bits

size_in_bytes()

The minimal amount of bytes that can hold the RSA modulus

Crypto.PublicKey.RSA.oid = '1.2.840.113549.1.1.1'

Cisco Switch Generate Rsa Key

Object ID for the RSA encryption algorithm. This OID often indicatesa generic RSA key, even when such key will be actually used for digitalsignatures.